Dee Zee Truck Tailgate Assist
After years of trying to catch our a heavy falling tailgate, we decided to do something about it with the Dee Zee Truck Tailgate Assist.
Trying to catch a falling 70+ lb tailgate with arms full of groceries is not my idea of fun. To avoid this dilemma, we purchased and installed the Dee Zee Truck Tailgate Assist. It’s a simple after market shock absorber that you can easily install yourself without doing permanent damage to your truck. I can’t recommend this thing enough, and I’m pissed we didn’t buy one sooner!
Installation was super easy. I followed their written instructions – the only stumbling point was setting the initial screw post – but I could have easily avoided confusion if i had simply viewed their step by step videos (here). That said, it was easily resolved an not even enough of a stumble to describe here. In other words – if you can turn a screw, you can install this thing!
If you own a truck, you need this product! No more banging your hip or the trailer jack with the tailgate! Just open and watch it subtly glide down like magic.
Dee Zee Tailgate Assist – Weaselmouth
Dee Zee Tailgate Assist – Weaselmouth
Dee Zee Tailgate Assist – Weaselmouth
We left Whidbey Island a few days ago with our sails set for North Carolina.
Getting off the ferry for the last time (until we come back, of course.)
It all happened so fast – at the end of May, a friend emailed me about a job at Epic Games in Cary, NC. I went out for an interview, got the job, and gave my notice at Microsoft within a week. Now we’re sleeping at the KOA in Ellensberg, WA, night 1 of our cross country adventure to NC, and my trip back home.
The Ellensburg KOA may not be much to look at, but around 10pm, their giant red sign was a welcome sight.
Among the pros for me (aside from the job) is the opportunity to reconnect with the friends and family I left in NC over 10 years ago. Tiff also has family on the East Coast so visits will be much easier. But with this pro comes a major con –we had to leave our friends, old and new, in Seattle and the Island!
It was sad to leave Janae and Kelly at Turnco Wood Goods, the $7 movies at The Clyde theater, and the of course, the beach.
Possibly the best off-leash dog beach in Washington.
Thanks to everyone who made our time on this little island truly memorable.
Hi Ho WifiRanger, To the Rescue!
What’s in the Box – WifiRanger Mobile Ti and Go2
We may not travel as often as some fulltimers, but we have many of the same internet connectivity frustrations as our more mobile Airstreaming friends. A few of them have written about a new product that helps keep you online no matter if you’re on cellular or WiFi – it’s called the WifiRanger. I reached out to the folks at WifiRanger and explained our situation. They sent us over an evaluation unit and we’re impressed with how well it works!
I love it when a company is hyper-focuses on providing the best solution after listening and getting to know their customers’ pain points. From the first time you visit their website, to hooking up and using their products, it’s obvious that WifiRanger is for RVers who’ve had trouble connecting for years.
Let’s start with the hardware. WifiRanger shipped us two routers – the WifiRanger MobileTI and GO2. Why two you ask? The MobileTI installs outside your RV and connects via hard wire to the GO2 router inside. This setup serves two major purposes. First, to capture Wifi and Cellular signals from outside, avoiding what’s known as the “Faraday Cage” problem of living in an aluminum tube. An ethernet cable brings the captured signal inside to a second router which serves as an internal wired OR wireless hub for connecting other devices and computers (ahem, Xboxes) you may have scattered throughout your home. This setup alone serves to boost the available signal inside the Airstream, but the WifiRanger also has added WiFi signal boosting capabilities built-in as well!
Everything you need to install the units come in the box — from cables to mounting tape, they’ve thought of everything. They even include a mounting bracket for the folding “batwing” TV antenna common on many RVs and Airstreams! Unfortunately, they don’t send out a technician to install the outside antenna, which would have been nice if you ask me, but they’ve thought of just about everything else!
Understandably, WifiRanger didn’t include specific instructions for running cable from the rooftop into my 2010 27FB Airstream International. After doing it myself now it’s obvious that this is a case-by-case affair depending on how your rig is setup, where holes are pre-drilled, etc.
Disclaimer – I’ve never drilled into the hull of our Airstream. The thought makes me a little queasy. The rest of this section is my experience – if you’re an old pro at this sort of thing, you can skip ahead or stay here and laugh at our troubles!
WifiRanger does a great job of preparing you with tools, but you’ll also need these things:
- Drill with #21 bit (I used a 1/8 drill)
- Rivet gun with 5/32 rivets Olympic rivets (I used pop rivets, appearantly a no-no, so i’ll be replacing these this summer)
- Razor or exacto knife
- Alcohol or mineral spirits
- Vulkem or other brand Polyurethane sealant
- A partner for running cable
- a plan
I decided that going through the vent for the refrigerator was the path less dangerous for me, so on the roof I went. Instead of finding a perfectly open hole, I found a cover and screen fastened to said vent with rivets. Despite my best efforts, I had no choice but to drill into the top of the Weasel’s head.
Drilling out the old rivets
carefully prying up one side of the vent
Luckily, the screen was already loose!
Turns out, it was easier than I thought to get the rivets out. I recommend a tool to start the drill bit so you’re not skating all over the place like I was, but you can do it without one if you’re careful. I only needed to pop out the rivets on one side of the vent to use enough hole space to drop in the cable. (I realized after the fact that i used the wrong rivets… so I’ll be replacing pop rivets with 5/32 Olympic rivets this summer).
Up next, fishing the cable down behind the fridge. This is definitely a two person job and proved the most challenging for us. We opted to NOT remove the fridge. We should have, but we didn’t. I took out the false wall behind the cubby above the fridge and collected all the cable from above. Then, with Tiff craning her neck up from the outside access door behind the fridge, I started poking the cable down. This took a long time – maybe an hour or more.
Fishing the wifiranger MobileTi cable down the vent
Collected the cable on top of the Fridge from the vent above.
Here comes the fun – feed the wire behind the fridge.
Only one white fridge drain hurt in the process… That’s the WifiRanger cable in black.
And finally, down the hole!
FINALLY we poked through and Tiff was able to grab the bottom of the cable. We pulled through and into a pre-existing hole set up for other cables. Then we just ran the cable under Lucy’s Bed our side couch under the TV where we keep the Mac Mini, Xbox, and now, the WifiRanger GO2.
Setting Up and Getting Connected
With everything connected we started the setup process. It’s important to remember that there are two routers – you set one up to act as a slave (the outside Mobile unit) and the other a Master (inside GO2). You’ll see two wifi sources appear on your PC if you leave the GO2 wifi on. WifiRanger gives you two options to log into your router – simply typing in ‘mywifiranger.com’ takes you to the master, or you can also type in an ip address to go directly to the settings page for each router. I really liked how they pre-set the router number to an ip address for easy memorization – another touch that reminds us they are thinking about pain points!
Wifiranger Control Panel
Our setup experience overall was very much a plug and play affair. We “had to” (ok , I wanted to!) tweak a few settings to get everything dialed in and avoid searching for cellular signal (for now), but that was easy thanks to preconfigured settings you can load from the user interface. Again, there are quick start and full docs online to help you dig deeper into the settings.
Overall the software interface is very nice once you understand there is one for the slave and one for the master. Any changes you make to one don’t necessarily carry to the other, nor should they. For example, you want to make sure the antenna strength outside is strong, but the one inside is lower so you don’t get interference. But this is an easy concept to grasp. Everything else is very well documented with help tips and of course full documentation is available online.
Closing Up Shop
Now that we’re sure everything is set up, it’s time to button up the installation. We fed enough cable down to keep a ring of slack on top of the refrigerator. We also made sure there was plenty of cable to allow the WifiRanger MobileTI to easily ride up and down as we raise and lower the batwing. I tightened the fastener screws on the batwing one last time and zip-tied the cable to the antenna. Then I re-attached the vent hood.
It was my first time riveting and applying Vulkem to anything. I can’t say I did a great job here – more like passable (except for using the wrong rivets). First I cleaned off any excess old sealant and wiped the area with alcohol. Then I applied a layer of black Vulkem in a small bead. This stuff is BRUTALLY sticky, so a little goes a long way. It’s pretty tough to work with overall. I pushed the vent back down, ensuring a solid seal, and tried to clean up as much excess Vulkem as I could. Then I re-riveted the cover down using the original rivet holes.
Resealed Refrigerator Vent on Airstream International 27fb
Resealed Refrigerator Vent on Airstream International 27fb
Here’s the final product – again, passable. Ok, so maybe I overdid it on the Vulkem! I’ll be checking on it over the next few months to make sure we’re not leaking anywhere.
Ifs, Ands, or Buts
We’ve really not found too many problems with the WifiRanger setup yet. Having two connected routers instead of one takes a tiny “getting familiar” period. Of course NOT requiring a drill to the top of the roof would have been a plus as well. I believe this is an option for the Sky model, but we wanted the extra range and lifetime warranty given by the MobileTI.
We’ve had a few major internet outages so far while using the WifiRanger, and I can’t blame the WifiRanger for any of them. I updated the firmware on the GO2 but forgot to do so on the Mobile once, resulting in an inconsistent signal. An error message would have been nice, but I know what to look for now! Other outages were the result of a bad router and inconsistent internet sources.
It’s also important to note that this is NOT a cellular antenna or amplifier. It catches and boosts WiFi signal only. You can attach an aircard to the GO2, or you can connect a Mifi wirelessly as your cellular internet source, but you get no other benefit to increase the cellular signal. WifiRanger sells a separate cellular booster if that is something you need.
One really nice feature is the ability to “failover” from one connection type to another. So if you’re cruising along on WiFi and something happens to the signal, the router can automatically jump to a backup cellular, ethernet, or other WiFi signal. This is particularly nice if you travel with lots of WiFi devices. You’ll only need to log the WifiRanger unit into the new signal. All your other devices happily stay connected to your internal WiFi.
Speaking of cellular signals, there are lots of options to track data and limit how strong or weak a signal is before you join. You can also “rate” your signals to help remember and more easily connect to favorites.
The MobileTI itself is really solid. It’s weatherproof, comes with a Lifetime Guarantee, and the bracket and unit feel sturdy and solid. And since it attaches to the external extending TV antenna, you can raise it above lots of interference causing obstacles.
My favorite feature is the ability to turn your WifiRanger into a WiFi Broadcaster! You can set it up to reflect the signal it gets back out so that others around you can get online. Obviously something to be careful with as long as cellular data prices climb, but is a nice option for friends who don’t have access.
Overall, we’re super impressed with the WifiRanger MobileTI and GO2 units as a long distance WiFi connection device. It’s rare that a product lives up to the hype the way the WifiRanger has for us. We look forward to putting the cellular capabilities to use once we go fully mobile. For now, we’re finding its range to be astonishing for distant WiFi signals – we’ve connected from 1000ft and get signals as far away as 2000ft. Connection is simple and setup is a breeze (once you break out the drill and fish the cable inside).
We highly recommend the WifiRanger MobileTI and GO2 units for anyone looking to solve their WiFi internet connectivity issues on the road or anywhere distance is an issue.
Wifi Ranger Installed on Airstream International 27fb
Have any of you used the WiFiRanger? If so, we’d love to hear your thoughts and experiences!
Getting Decent FREE WiFi…Bwahaha!
We’ve lived in our Airstream full-time for just over 3 years, and for 3 years now, getting decent internet has been a hassle. I completely understand that getting 4G in the middle of Death Valley or off the coast of Oregon might be a little much to ask, but when you’re in $35 per night RV park in Dallas, TX offering “Free WiFi,” I expect at least a decent signal. To date, getting decent “free WiFi” has been the exception, not the rule. Here are a few things we’ve tried to do to remedy this problem over the years.
A 4G affair
Our next Antenna Option? – photo from http://www.qrz.com/db/N9FN
My first attempt was to bite the cost bullet and simply go 4G. After all, how expensive could it be? Turns out it can be brutally expensive, especially for those of us into things like watching Netflix and playing Xbox! And until recently, there weren’t many reliable ways to watch your data use until it was too late and the bill shot north of $300.
Then there’s the reception. We used a MiFi unit from Verizon. It worked ok for reception most days, but it really didn’t like being inside our aluminum cage. So, I did what any internet starved Airstreamer would have done – I bought an antenna…and a booster..and cables. I ended up spending over $300 just to try to improve my signal inside the Airstream! Finally, after rigging up a series of connected PVC pipes to get the antenna up as far as I could, I was getting 2-3 bars of reception – assuming it wasn’t overcast or rainy. But, when is it ever really overcast or rainy in the Pacific Northwest?
Drinking From a Fire Hose – DSL!
After months of poor reception, overage fees and insane cell phone bills, we found a new park where more options became available. In fact, we had a DSL line installed directly to our spot! Now, for those of you coax / fiber nerds, I know. DSL? When was this post written, 1982? After getting just under 2Mbps and paying a fortune, drinking in 4Mbps at $39.99 per month was pure glory! This is an option for select few RVers, and not one we plan to have again anytime soon – but it was great while it lasted!
Back to the Free Wifi Desert
We’ve recently moved again and find ourselves at the whim of the airwaves to bring internet into the Airstream. We’re staying on a friend’s property who have graciously offered to share their WiFi. It’s much more reliable than most park provided free WiFi and there’s no one else connecting to it. The only problem now – we’re too far away to get a signal!
I pull out my precarious rig of cabling, antenna, and booster, and realized a core missing feature – the ability to boost or otherwise carry a WiFi signal back into my RV with my current setup. My booster only works for cellular – I would need to buy yet another device to handle WiFi! Argh!!!
A Light at the End of the Tunnel?
The WiFiRanger Mobile Ti and Go2
Instead of blindly leaping into another technological whirlpool, we turned to the vast know how of our Airstreaming pack for advice. Laura and Kevin of Riveted have an awesome 3G / 4G / Wifi setup that we’ll eventually want to grow into. Chris and Leslie of tincantardis.com have a Wifiranger solution, but troubles with installation and drilling holes seem scary. But after researching more on the sometimes stoic Airforums, we found more raves about this new-comer, claiming Wifiranger to be the “solution to all the worlds problems!” After reading the awesome installation account by the much respected Vintage Airstreaming Podcast, I knew we had to give this thing a try.
Will it work for us? Can it really live up to the high praise from our most respected tech-saavy and internet dependent Airstreaming friends?
Check back soon for our followup post – WiFi in an Airstream: The Solution!
A few weeks ago, we were asked to evaluate a product called the AnimAlarm, a simple solution to a very big problem for many RV owners. The Animalarm is a little gadget that wirelessly monitors the temperature in any environment. Even better, it TEXTS you when the temperature gets too hot or too cold! Read on for our Review.